This post contains affiliate links. As an Amazon Associate, I earn from qualifying purchases. This means I may earn a small commission if you purchase through my links at no extra cost to you.
A replacement grip is the thicker base layer on the racket handle, while an overgrip is a thin layer wrapped on top of it. The replacement grip sets cushioning and handle size, and the overgrip mainly adds tackiness or moisture control and is replaced more often.
They sound almost identical, and a lot of players use the terms interchangeably. They're not the same thing, and mixing them up leads to real problems — a grip that feels wrong, a handle that's too thick, or a racket that slips in your hand at exactly the wrong moment.
I've seen club players wrap an overgrip directly onto a bare handle because they thought that's what you're supposed to do. I've seen others pile three overgrips on top of an already-perfect replacement grip because they just kept layering instead of ever replacing the base. Both are more common than they should be, and both quietly kill your feel and control on court.
The difference takes about five minutes to understand. Here's what you need.
What is a replacement grip?
A replacement grip is the foundational layer of grip material that sits directly on the racket handle. It's what your hand would touch if you stripped everything else away.
When you buy a new racket, it comes with a replacement grip already installed — manufacturers call this the stock grip or base grip. Quality varies a lot depending on what you paid. Budget frames often come with serviceable but fairly basic material. Higher-end rackets sometimes come with better stock grips, though plenty of serious players swap theirs out immediately for something they prefer.
Replacement grips are generally thicker than overgrips — typically between 1.5mm and 2mm — and they're designed to provide cushioning and a solid base to build on. Most have a self-adhesive backing. They come in a few materials: synthetic, leather, and some foam-based options.
Leather grips are the traditional choice for players who want pure feel and a firm, clean handle shape. Less cushioned, but great feedback through the handle. Federer used a leather base grip throughout his career with a single overgrip on top. If you want that firm, precise feel, leather is how you get there.
Synthetic grips are the standard on most modern rackets. More cushioning than leather, grip reasonably well on their own, and by far the most available option. If you play recreationally and don't have strong preferences about handle feel, a decent synthetic is all you need.
The replacement grip also sets your handle size — which is the main reason to pay attention to it. If you've had grip fitting done, your replacement grip's thickness is part of that equation. Swap it for something significantly thicker or thinner and you've changed your grip size.
What is an overgrip?
An overgrip goes on top of the replacement grip. It's the layer your hand actually contacts when you play, and it's designed to be replaced often — sometimes after every session if you're sweating heavily or playing in hot conditions.
Overgrips are much thinner, usually 0.5mm to 0.6mm. They're made to be wrapped over something else, not to serve as a standalone base. This is the thing most people get wrong: an overgrip is not a replacement for your replacement grip. It's an addition to it.
They come in a few types:
Tacky overgrips are what most players reach for. Wilson Pro Overgrip and Tourna Grip sit at opposite ends of this spectrum. Tacky overgrips feel slightly sticky out of the package — confident grip in drier conditions. Tourna Grip feels more powdery and works better in heat and humidity or if you sweat a lot. I use Head Xtreme Soft on my Wilson Shift 99 V1. Leans tacky, holds up well through a full match.
Absorbent overgrips prioritize moisture management. If your hands are soaking through your grip by the second set, these can genuinely extend how long you maintain control. Players in hot climates or those who naturally sweat a lot often swear by them.
Overgrips are cheap — a dollar or two each — which is the whole point. Instead of replacing your base grip every time the surface wears out, you peel off the old overgrip and wrap a fresh one.
The actual differences
Thickness and function. Replacement grips are thick and structural. Overgrips are thin and sit on top. Using only an overgrip on a bare handle will feel noticeably different — usually worse — because you're missing the cushioning and structure a proper base grip provides.
How often you replace them. Replacement grips last months, sometimes over a year. Overgrips are consumables — swapped out regularly, sometimes weekly or after each session.
Cost. Replacement grips run five to twenty-five dollars depending on brand and material. Overgrips are one to three dollars each, usually sold in three-packs.
Feel and cushioning. Replacement grips provide structural cushioning and define the handle's base feel. Overgrips adjust surface texture and moisture management but don't add meaningful cushioning.
Handle size. Swapping a replacement grip can noticeably shift your handle size. Adding or removing an overgrip makes a smaller difference — enough to feel, not enough to change your grip size category.
The order. Replacement grip on the bare handle. Overgrip on top. That's the setup virtually every professional uses.
When to change your replacement grip
The base grip lasts a lot longer than an overgrip. Use overgrips consistently and they protect it from direct wear — it can genuinely go a year or more before needing attention.
A few clear signals to watch for:
The cushioning is gone. Peel off your overgrip and press your thumb into the base. If it feels hard and compressed rather than slightly springy, the foam has broken down. A dead base grip stops absorbing shock and changes how your handle feels even with a fresh overgrip on top.
It's started to peel, crack, or smell. Sweat works through an overgrip over time, especially if you've been playing heavily without changing it regularly. Once the base grip starts deteriorating structurally, replace it.
You've stacked too many overgrips. If you've got multiple layers built up, strip everything back to the handle and start fresh. More than one overgrip at a time is usually a sign things have gotten away from you — though some players deliberately add a second for extra thickness, which is fine if it's intentional.
Your grip size has changed or never felt right. If your hand has changed — common in juniors still growing — or you're realizing your handle size was always slightly off, the replacement grip is where you make that fix.
For most club players using overgrips consistently, once a year is a reasonable schedule. Play four or five times a week and sweat heavily? Move that up.
When to change your overgrip
Far more often than most players actually do it.
How long one lasts depends on how heavily you sweat, session length, conditions, and how sensitive you are to feel changes. The markers:
It's lost its tackiness. Once that slightly sticky feeling is gone and your hand starts slipping before sessions are over, you've pushed it too far. A slipping grip is a performance problem and a safety one.
It's visibly dirty or smooth where your hand contacts it. The areas under your palm and fingers wear fastest. If the texture there has gone smooth or the material looks matted, replace it.
It's still damp days later. Overgrips that have absorbed too much moisture feel damp when you pull them out of your bag. Once they've reached that point, they're not recovering.
You notice it during play. The best overgrip is one you stop thinking about after the first few shots. If you're adjusting your grip mid-rally or gripping tighter to compensate for slippage — that's your overgrip telling you it's done.
For a casual weekend player, once a month is probably enough. Playing three or more times a week, aim for every week or two to three sessions. Professionals on tour often change mid-match. You don't need to go that far, but it tells you how much these players care about a fresh, consistent grip feel.
How to wrap a replacement grip
More care required here than with an overgrip, because you're dealing with the structural base of your handle. Get it right and it'll stay put for months. Rush it and you'll have edges lifting and lumps under your overgrip.
1. Strip the old grip. Remove everything — the old replacement grip and any finishing tape. Clean off any adhesive residue. Starting clean matters.
2. Find the tapered end. One end tapers to a point. That's where you start. Most grips have a self-adhesive backing you peel as you go.
3. Start at the butt cap. Angle the tapered end at the bottom of the handle, pointing toward the butt cap. Follow any marked starting points on the grip.
4. Wrap with consistent overlap. Work upward with steady, firm tension — roughly one-third overlap. Pull the material snug as you go. Loose wrapping creates air gaps and lumps.
5. Smooth as you go. Press the grip flat behind the wrap with your thumb. Gets rid of bubbles and ensures it seats evenly.
6. Finish at the top. Trim any excess at an angle if needed, or fold it under the finishing tape.
7. Secure with finishing tape. Wrap the tape around the top edge tight and flat.
First time takes some patience. After a few attempts it goes quickly. If you completely mangle it, most pro shops will install a replacement grip for a few dollars — worth doing once if it helps you see what you're going for.
How to wrap an overgrip
Thinner and more forgiving than a replacement grip. Most players figure out their technique after a few tries.
1. Start at the butt cap end. One end is designed to start at the bottom of the handle, usually with a small adhesive strip.
2. Angle and overlap. Peel back the protective film partway and position the starting end at roughly 45 degrees at the bottom of the handle.
3. Wrap with consistent tension. Pull firmly as you spiral upward. Too loose and you get air pockets; too tight and the thin material tears. Firm and even.
4. Keep the overlap consistent. Around 2–4mm is typical, but this is personal preference. More overlap, slightly thicker feel. Less overlap, closer to the handle's base feel.
5. Finish at the top. Cut the excess cleanly.
6. Secure with the finishing strip. Wrap it around the top edge. Some players use electrical tape here for a more secure finish.
7. Run your hand over it. Feel for lumps or uneven sections. If something's off, unwrap from that point and redo it. Overgrips are cheap enough that starting over isn't a big deal.
The whole thing takes about two minutes once you've done it a few times. I change mine at the court before warm-up when I remember to bring spares — a habit worth building. A fresh overgrip before a match costs almost nothing and takes less time than warming up your serve.
Wrapping up
Replacement grip is your foundation — structural, cushioning, changed once a season. Overgrip is your playing surface — thin, cheap, replaced regularly. Use them in the right order. Keep the base in good condition. Change your overgrip before you're fighting it rather than after.
If you've been running the same overgrip until it's practically falling apart, or if you've never thought about what's under it, pull your racket out and actually look. Strip it down, check the base grip, put a fresh overgrip on. Feel what the racket is supposed to feel like.
It's one of the cheapest improvements you can make. Stop playing with a grip that's working against you.